DK-7_microphone_sets_for_drums
DK-7_microphone_sets_for_drums3remicmicrophones_DK7_placement_980remicmicrophones_DK7_placement

REMIC DK7 Mic sett for Trommer

REMIC DK-7 – Exclusive studio and live mic set for drum kit

The REMIC DK-7 mic set for drums consists of 7 pcs. of High-definition condenser microphones and can be used for any type of live, studio, theatre and broadcast production, and delivers a natural sound response. Each microphone-housing is made of black natural rubber to ensure fast, flexible and reliable mounting and comes with a 4mm cotton woven MOGAMI cable with a length of 4 meter. The mics can easily be mounted on the rim of the drums and on the stand for cymbals.
This means that you can get rid of all loose clamps and mic-stands, that often take up a lot of space around the drum kit.

The REMIC DK-7 mic set comes in a custom hard-shell SEAHORSE™ case and the strong yet light polypropylene construction is dent proof, crack proof and chip proof. When your job takes you out into every kind of weather or environmental hazard, peace of mind about your sensitive microphones will never be one of your concerns because inclement weather and harsh conditions are not likely to ever be a problem. Also an Automatic Purge Valve with a GORE-TEX® membrane will equalize the air pressure but not ever allow moisture or dust to enter inside.

IN THE CASE

1 x BD1100 for the bass drum

4 x DR1000 for snare and tomtoms

2 x HC2000 underhead mics for cymbals
 
The polar pattern of each microphone is omni-directional, therefore the REMIC DK-7 mic set can easily be used in any studio and live production. If more mics are needed in order to cover a larger drum setup, the microphones can be bought individually.
Easy to mount/unmount
No mic stand needed
Accurate & natural sound response
High definition condenser microphones
Wide dynamic range
For live | studio | theatre & broadcast production
4 meter cotton woven signal cable
Handcrafted in Denmark
 
Spec:
Microphone type: High definition pre-polarized condenser element
Technology: PFM™ (Proximity Field Microphone)
Freq. Range: 6 Hz – 21 KHz
Cartridge technology: Direct balanced
Sensitivity: 4mV/Pa (-50dBr.1V/Pa)
Power consumption: 2mA / 48V Phantom
Dimensions: 274 x 250 x 124 mm (case)
Weight: 1,7 Kg (3.8 lbs), (case with microphones)

Varenummer: DK7. Kategorier: , .