MAX2 back

d&b audiotechnik MAX2

The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands.

The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill.

The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

  • System data
  • Frequency response (–5 dB) 55 Hz – 20 kHz
  • Max sound pressure (1 m, free field)1
  • with D6 131 dB with D12 135 dB
  • with D20 135 dB
  • with D80 135 dB
  • Input level (100 dB SPL/1 m) passive –17 dBu
  • Loudspeaker data
  • Nominal impedance 8 ohms
  • Power handling capacity (RMS/peak 10 msec) 250/1600 W
  • Nominal dispersion angle (h x v) 75°
  • Components 15“ driver with ferrite magnet coaxial 1,4” exit compression driver passive crossover network
  • Connections 2 x NLT4 F/M optional 2 x EP5 or 2 x NL4
  • Weight 23 kg (50 lb)
Varenummer: Z1120.002. Kategorier: , .