d&b audiotechnik J12

The J12 is a 3-way design housing 2 x 12″ LF drivers, one hornloaded 10″ MF driver and two 1.4″ exit HF compression drivers with 3″ voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120° horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J12 is acoustically and mechanically compatible to the J8 loudspeaker. It can be used in columns of purely J12 loudspeakers or combined with J8s and / or with J-SUBs. The J12 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, the side and rear panels incorporate four handles, and two NLT4F/M, EP5 or NL8 connectors wired in parallel are also mounted at the rear.

  • System data 
  • Frequency response (–5 dB standard)
  • 48 Hz – 17 kHz Frequency response (–5 dB CUT mode)
  • 85 Hz – 17 kHz Max sound pressure (1 m, free field)1
  • with D12/30D 145 dB
  • with D80 145 dB
  • Loudspeaker data 
  • Nominal impedance LF/MHF 6/12 ohms Power handling capacity
  • LF (RMS/peak 10 msec) 500/2000 W Power handling capacity
  • MHF (RMS/peak 10 msec) 200/800 W Nominal dispersion angle (horizontal)120° Splay angle settings 0 – 7° (1° increment)
  • Components2 x 12″ driver/1 x 10“ driver 2 x 14″ exit compression driver passive crossover network Connections 2 x NLT4 F/M optional 2 x EP5 or 2 x NL8
  • Weight60 kg (132 lb)
Varenummer: Z0651.002. Kategorier: , .