24S_mitFlyingBracket_Vertikal
24S-S_OhneFrontgitter

d&b audiotechnik 24S

24S loudspeaker
The 24S is a high performance full range 2-way passive loudspeaker housing two 12″ drivers in a bass-re ex enclosure with a 1.4″ exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12″ drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized ow characteristics and a large cabinet volume provide a signi cant low frequency reproduction.
With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d&b subwoofers. It can be ground stacked, own individually, or own in a cluster. The rotatable HF horn can be rotated by 90° to enable horizontal orientation.
The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint nish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d&b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant option enables the operation of loudspeakers in changing ambient conditions, and features a xed cable. The 24S can also be supplied in any RAL colour. This Special Colour option can be provided for rigging accessories.

Varenummer: Z1610.000. Kategorier: , .

Produktbeskrivelse

  • System data
  • Frequency response (–5 dB standard) …………………………55 Hz – 18 kHz
  • Frequency response (–5 dB CUT mode)………………………90 Hz – 18 kHz
  • sound pressure (1 m, free eld)1
  • with D20/30D ……………………………………………………………………… 138 dB
  • with D80……………………………………………………………………………….138 dB

 

Loudspeaker data

  • Nominal impedance ……………………………………………………………….4 ohms
  • Power handling capacity (RMS/peak 10 msec) …………….500/2000 W
  • Nominal dispersion angle ………………………………….. 75° x 45° rotatable
  • Components ……………………………2 x 12″ driver with neodymium magnet
  • ………………………………………………………………. 1.4″ exit compression driver
  • ………………………………………………………………….. Passive crossover network
  • …………………………………………………………………………1 x NL4
  • ……………………………………………………………………. 1 x screw terminal block
  • Dimensions (H x W x D)……………………………………800 x 410 x 420 mm
  • ……………………………………………………………………………..31.5 x 16 x 16.5″
  • Weight ………………………………………………………………………… 33 kg (73 lb)